Precision Machined Parts – Technical Specifications
📸 Visual Reference: Precision Machined Parts – Technical Specifications
Figure 1: Typical CNC machined parts made from Precision Machined Parts – Technical Specifications
Image: Example of precision components showing surface finish and dimensional accuracy
Figure 2: Material microstructure of Precision Machined Parts – Technical Specifications
Image: Micrograph showing grain structure and phase distribution
Figure 3: CNC machining process for Precision Machined Parts – Technical Specifications
Image: Machining setup with proper tooling and coolant application
Note: Actual images should be added showing specific applications, material samples, and machining results. High-quality photos improve engagement by 47%.
Inspection Capabilities
- Coordinate Measuring Machine (CMM)
- Optical comparator / Vision system
- Surface roughness tester
- Digital calipers and micrometers (calibrated)
- Height gauge and granite surface plates
Quality Documentation
- First Article Inspection (FAI) – AS9102 forms
- Material certificates (EN 10204 3.1)
- CMM measurement reports
- Certificate of Compliance (CoC)
📊 Technical Specifications: Precision Machined Parts – Technical Specifications
| Property | Typical Value | Test Standard |
|---|---|---|
| Tensile Strength | Material dependent | Relevant ASTM standard |
| Yield Strength | Material dependent | Relevant ASTM standard |
| Elongation | Material dependent | ASTM E8 |
| Hardness | Material dependent | ASTM E10 |
| Key Property 1 | Value range | Testing standard |
| Key Property 2 | Value range | Testing standard |
Note: Values are typical ranges. Actual properties may vary based on heat treatment, processing, and specific alloy composition. Consult material datasheets for precise specifications.
Related Articles
- How long does it take to get a quotation?
- Low Volume Production Parts – Technical Specifications
- 20CrMo Alloy Steel: Complete Guide for CNC Machining Applications
⚙️ CNC Machining Recommendations for Precision Machined Parts – Technical Specifications
Tooling Selection
- End Mills: Use carbide end mills with appropriate coatings (TiAlN for steels, diamond-like for non-ferrous)
- Drills: High-speed steel or carbide drills with proper point geometry
- Inserts: Select grade based on material hardness and cutting conditions
Cutting Parameters
- Speed: Adjust based on material hardness and tool diameter
- Feed: Optimize for chip formation and surface finish
- Depth of Cut: Consider tool rigidity and machine capability
Coolant & Lubrication
- Use appropriate coolant type (synthetic, semi-synthetic, or straight oil)
- Ensure adequate flow and pressure for heat dissipation
- Consider minimum quantity lubrication (MQL) for certain applications
Quality Considerations
- Monitor tool wear and implement preventive maintenance
- Verify dimensional accuracy with CMM or precision measuring instruments
- Document process parameters for repeatability
🔗 Related Services
- Quality Control & Inspection – Quality
- Precision Machining Capabilities – Capabilities
